Sunday, 18 October, Hall A 8:30-10:30 Opening Ceremony |
| 10:00-10:30 Plenary Presenter: Prof. J.M. Anderson Case Western Reserve University, USA Perspectives on the Evaluation of Polymer Biocompatibility | 10:30-11:00 Break, Exhibition & Poster Viewing | Nano-structured Polymers | 11:00-11:30 Keynote Lecturer: Associate Prof. M. Mehrabzadeh Iran Polymer and Petrochemical Institute, Iran Polymer Clay and Polymer Blend Nanocomposite | Chairpersons: R. Bagheri , B. Kaffashi, A. Rahimi | Code | Time | Title | A-10-317-1 | 11:30-11:50 | Viscoelastic Properties of Sulfonated Polyacrylamide Nano-composite Hydrogels J. Aalaie, E. V. Farahani , A. Rahmatpour, and M.A. Semsarzadeh | A-10-274-1 | 11:50-12:10 | Different Behaviors in Electrospinning of Polystyrene and Polyacryl-onitrile Solutions D. Fallah i , M. Rafizadeh, and N. Mohammadi | A-10-271-2 | 12:10-12:30 | Mechanical and X-ray Diffraction Properties of Nanoclay/CNT/Un-saturated Polyester Nanocomposites B . Kaffashi and F. Honarvar | 12:30-14:00 Lunch Break, Exhibition & Poster Viewing | Chairpersons: D. Fallahi, H. Jafari , M. Mehrabzadeh | A-10-130-1 | 14:00-14:20 | A Comparison Between Two Silane Coupling Agents to Increase Crosslink Density and Dispersion State in Silica–filled SBR Nanocomposites S . Kazemi , A.S. Ghaemmaghami, A.A. Katbab, and M. Abdouss | Sunday, 18 October, Hall A | A-10-147-1 | 14:20-14:40 | Correlation of Morphological and Rheological Characteristics of Low Density Polyethylene/Ethylene-vinyl acetate/ Organoclay Ternary Nanocomposites A . Behradfar , A. Shojaei, and N. Sheikh | A-10-209-3 | 14:40-15:00 | A Novel Bionanocomposite Film Prepared from Modified Starch/ Carboxymethyl Cellulose/Montmorillonite H. Almasi, B . Ghanbarzadeh , and A.A. Entezami | A-10-238-1 | 15:00-15:20 | The Effect of Surfactant Type on the Characteristics of Poly-aniline Nanocomposites A . Daryanoush and H. Eisazadeh | 15:30-16:00 Break, Exhibition & Poster Viewing | Chairpersons: M. Abdouss, M. Atai, H. Eisazadeh | A-10-253-3 | 16:00-16:20 | Synthesis of Hydrophilic Chelating Copolymers for Removal of Toxic and Heavy Metal Ions Containing Water and Wastewaters S . Jalali , P.Najafi Moghadam, and K. Akbari Dilmaghani | A-10-285-1 | 16:20-16:40 | Synthesis of Exfoliated Polystyrene Nanocomposite via ATRP H . Roghani-Mamaqani , M. Najafi, V. Haddadi-Asl, and M. Salami-Kalajahi | A-10-650-1 | 16:40-17:00 | Nanomechanical Properties and Corrosion Protection Evaluation of Nanocomposite Hybrid Coatings on AA1050 D . Zare-Hossien Abadi , A. Ershad-Langroudi, and A. Rahimi | A-10-630-6 | 17:00-17:20 | Epoxy/Silane Modified Nanoclay Nanocomposites: Morphology and Thermal Properties M . Khoeini , S. Bazgir, M. Tamizifar, and K. Arzani | A-10-442-3 | 17:20-17:40 | The Effects of Nanostructure on the Conductivity and Morphology of Poly(aniline-co-o-methoxy Aniline-co-o-toluidine) as Prepared by Interfacial Polymerization B. Massoumi, F. Ghashangpour Peivasti , A.A. Entezami and M. Balaei |
Sunday, 18 October, Hall B Polymer Synthesis and Characterization | 11:00-11:30 Keynote Lecturer: Prof. F. Afshar Taromi Amir Kabir University of Technology, Iran Synthesis of Star-shaped Polymers by Anionic Polymerization | Chairpersons: V. Haddadi Asl, S. Mallakpour, M. Nekoomanesh | Code | Time | Title | A-10-326-1 | 11:30-11:50 | Kinetic Study of Free-Radical Polymerization of Vinyl Acetate in the Presence of CDCl3 by 1H-NMR Spectroscopy M .A. Semsarzadeh and M. Abdollahi | A-10-457-1 | 11:50-12:10 | Preparation and Characterization of Schiff Base Polythio-amides Derived from 4,4′-Methylenebis(cinnamaldehyde) by Willgerodt –Kindler Reaction. M.Y. Khuhawar, A . Shah , and A.A. Shah | A-10-340-4 | 12:10-12:30 | Ethylene Polymerization Using of Fluorinated FI Zr-based Catalyst R. Sandaroos , G.H. Zohuri , S. Damavandi | 12:30-14:00 Lunch Break, Exhibition & Poster Viewing | Chairpersons: H. Salehi, M.A. Semsarzadeh, B. Tamami | A-10-634-2 | 14:00-14:20 | Crystalline Structure Analysis of Cellulose Following Ionic Liquid Dissolution by Means of X-ray Diffraction and FTIR Spectroscopy A . Shakeri and M.P. Staiger | |
A-10-41-1 | 14:20-14:40 | HS-SPME-GC-MS Analysis of Volatile Organic Compounds Released During Thermo-oxidative Degradation of PMMA M . Kaykhaii | | A-10-154-1 | 14:40-15:00 | Preparation of Oxidized Polypropylene Wax A . Salimi , M. Atai, M. Mirabedini, and M. Mohseni | | A-10-721-1 | 15:00-15:20 | Effect of RAFT Agent Structure on the Rate of Polymerization of Methyl Methacrylate in Presence of Clay Sh. Sadeghi-Ardakani, A .H. Navarchian , and M.B. Teimouri | | 15:30-16:00 Break, Exhibition & Poster Viewing | | Sunday, 18 October, Hall B | | Chairpersons: A. Shah, A.R. Shakeri, F. Ziaee | | A-10-511-2 | 16:00-16:20 | A Novel method to prepare Bi-supported Ziegler-Natta Catalysts of MgCl2/SiO2 M. Vatankhah, A. Rouhisefat , and S. Pourmahdian | | A-10-214-1 | 16:20-16:40 | Preparation of Porous Polyethylene Using Spherical SBA-15 Supported Philips Catalysts E. Ahmadi , M. Nekoomanesh Haghighi, A. Ramazani, and Z. Mohamadnia | | A-10-278-1 | 16:40-17:00 | Synthesis and Properties of Novel Aromatic and Chiral Polyamides in Eco-Friendly Media S. Mallakpour, and E . Hashemi | | A-10-285-2 | 17:00-17:20 | Effect of Nanoclay on Kinetics and Molecular Weight of Polystyrene Nanocomposite Prepared via In-situ ATRP H . Roghani-Mamaqani , M. Najafi, V. Haddadi-Asl, and M. Salami-Kalajahi | | A-10-168-1 | 17:20-17:40 | A New Smart Hydrogel Composite Based on Salep-g-Poly(sodium acrylate)/Alumina G .R. Bardajee , A. Pourjavadi, R. Soleyman, and F. Taherkhani | | | | |
Sunday, 18 October, Hall C Polymers and Environment & Polymer Wastes and Recycling | 11:00-11:30 Keynote Lecturer: Ms. H. Mivehchi Iran Polymer and Petrochemical Institute, Iran Environmental Aspects of Biodegradable Polymers | Chairpersons: M. Barikani, Y. Jahani, M.R. Vaseghi | Code | Time | Title | A-10-406-3 | 11:30-11:50 | Biodegradation Studies of Expanded Polystyrene Blends N . Atiq , M. Asif, S. Andleeb, M. Ishtiaq Ali, M. Sajjad Shaukat, and S. Ahmed | A-10-725-1 | 11:50-12:10 | Effect of Different Parameters on Deinking Efficiency of HDPE Films Using Acrylic Based Flocculants and Nonionic Surfactant M. Soltani, A. Khosravi, M. Khorasani, K. Gharanjig, and M. Khatibzadeh | A-10-6-4 | 12:10-12:30 | Synthesis and Characterization of Chlorine Containing Clame-resistance Polyurethanes M. Mohammadi Aslzadeh, G. Mir Mohammad Sadeghi, and M. Abdouss | 12:30-14:00 Lunch Break, Exhibition & Poster Viewing | Chairpersons: Z. Ahmed, G.R. Bakhshandeh, A. Oromiehie | A-10-242-4 | 14:00-14:20 | Ionic Liquid [Pr2im]Br as a Green Catalyst and Solvent for the Mild and Efficient Synthesis Chiral Polyamides under Microwave Irradiation S. Mallakpour and Z. Rafiee | A-10-48-2 | 14:20-14:40 | Rapid and Economical Method for Synthesis of Heterocyclic Polyureas S. Mallakpour and M. Dinari | A-10-633-1 | 14:40-15:00 | Synthesis of Polyester Polyol for Rigid Polyurethane Foams from PET Wastes A.H. Haghighi and F. Afshar Taromi | Sunday, 18 October, Hall C | A-10-565-1 | 15:00-15:20 | Application of Polypyrrole-modified Quartz Crystal Nano-balance and Principal Component Analysis for Determination of Nickel in Solution A. Mirmohseni and F. Farshi Azhar | 15:30-16:00 Break, Exhibition & Poster Viewing | Polymer Blends and Composites | Chairpersons: M.R. Kashani, H. Rahimi, A.R. Sabet | Code | Time | Title | A-10-27-1 | 16:00-16:20 | Mechanical Properties of Composite (Glass Fiber Fabric/Epoxy Resin) at Different Times of Hygrothermal Ageing A. Naceri | A-10-98-3 | 16:20-16:40 | Effect of Some Accelerators on Curing of Dicyandiamide/Epoxy Resin System M. Hayaty , M.H. Beheshty, and M. Esfandeh | A-10-718-1 | 16:40-17:00 | Epoxy/Glass Flake Composite: Curing Kinetics, Glass Transition Temperature and Degradation Temperature M. Ghaffari, A. Ghadami , M. Ehsani, H.A. Khonakdar, and M. Piri Niri | A-10-347-2 | 17:00-17:20 | Effect of Processing Condition on Crystallinity and Mechanical Properties of PE Fiber – PE Nanocomposites A. Babaei , S.R. Ghaffarian , and M.M. Khorasani | A-10-374-4 | 17:20-17:40 | Copolymerization of Aniline and Acrylonitrile Using Various Surfactants in Aqueous Media H. Eisazadeh and B. Ghobadi Bistouni |
Sunday, 18 October, Hall D Biopolymers and Biocompatible Polymers | 11:00-11:30 Keynote Lecturer: Prof. H. Mirzadeh Iran Polymer and Petrochemical Institute, Iran Skin Tissue Engineering Using Biodegradable Polymers (IPPISkin) | Chairpersons: J.M. Anderson, H. Mobedi, M. Zuber | Code | Time | Title | A-10-113-1 | 11:30-11:50 | Effect of a Novel Urethane Dimethacrylate Monomer on the Fracture Toughness of Dental Composites M. Atai , N. Sheibani, and A.A. Ghasemi | A-10-316-1 | 11:50-12:10 | Biosynthesis of Various Polyhydroxyalkanoate Polymers as Biodegradable and Biocompatible Material A. Al-Ashraf , R. Ahmad, N. Abd Aziz, V. Sevakumaran, N.M. Yusuf, and M.I.A. Majid | A-10-230-1 | 12:10-12:30 | PEG Molecular Weight Effect on Pancreatic Islets Camouflaging Against Lymphocytes E. Vasheghani Farahani , H. Aghajani , L. Barani, and S.H. Najaf Abadi | 12:30-14:00 Lunch Break, Exhibition & Poster Viewing | 14:00-14:30 Keynote Lecturer: Dr. S.S. Kordestani Amirkabir University of Technology, Iran Biopolymes in Advanced Wound Healing Managment | Chairpersons: A. Al-Ashraf, E. Vasheghani Farahani, M. Zandi | A-10-681-1 | 14:30-14:50 | Dextran Hydrogels as Topical Hemostatic Agents: Surface Response Methodology to Optimize Chemical Crosslinking Reaction H. Seyednejad, M. Imani , H. Salimi Kenari, and S. Hojjati Emami | A-10-231-1 | 14:50-15:10 | A Preliminary Study on Composite Preparation from Supramolecular Polycaprolactone and HAp for Tissue Engineering Applications P. Shokrollahi , H. Mirzadeh, F. Shokrolahi, M. Daliri, O.A. Scherman and W.T.S. Huck | Sunday, 18 October, Hall D | A-10-774-2 | 15:10-15:30 | Perforated Polyurethane Scaffold as Cartilage Substitution in Vitro & in Vivo Assessments S. Amanpour, A. Solouk , H. Mirzadeh, M.A. Mohagheghi, S. Rabbani, M. Soleimani, and F. Tirgari | 15:30-16:00 Break, Exhibition & Poster Viewing | Polymer Reaction Engineering | 16:00-16:30 Keynote Lecturer: Prof. M. Nekoomanesh Iran Polymer and Petrochemical Institute, Iran Kinetic Features of Ethylene Polymerization with Heterogeneous Ziegler-Natta Reactions | Chairpersons: S. Hakim, M. Lacuraj, A. Rabbani | A-10-326-2 | 16:30-16:50 | A New Approach to Calculate More Reliable Reactivity Ratios in the Atom Transfer Radical Copolymerization of Styrene and Methyl Methacrylate M.A. Semsarzadeh , and M. Abdollahi | A-10-319-2 | 16:50-17:10 | Copolymerization of Ethylene with α-olefins Using Synthesized BisIndZrCl2 Metallocene Catalyst M.M. Mortazavi, H. Arabi , G. Zohuri, M. Nekoomanesh, S. Ahmadjo, A. Farhadi |
A-10-157-1 | 17:10-17:30 | Effect of Operating Variables on Conversion in Semi-batch Emulsion Copolymerization of Butyl Acrylate and Glycidyl Methacrylate H. Bakhshi , M.J. Zohuriaan-Mehr, H. Bouhendi, and K. Kabiri | A-10-166-1 | 17:30-17:50 | Application of DOE Method to Experimental Study the Process Parameter Effects on Porosity of S-PVC Grains N. Etesami , M. Nasr Esfahany, and R. Bagheri |
Sunday, 18 October , Hall E ing and Simulation | 11:00-11:30 Keynote Lecturer: Prof. M.H.R. Ghoreishy Iran Polymer and Petrochemical Institute, Iran Finite Element Modeling of Tires | Chairpersons: A.A. Abianeh, M.H.R. Ghoreishy, E. Sotoudeh | Code | Time | Title | A-10-605-1 | 11:30-11:50 | Simulation of Conversion and Particle Size Distribution in a Continuous Emulsion Polymerization Reactor M. Barazandegan , and M. Shahrokhi | A-10-66-2,3 | 11:50-12:10 | Quasi Steady-State Simulation of Polymeric Fluids Flow in an Intermeshing Co-rotating Twin Screw Extruder (TSE) H. Sobhani , M.H.R. Ghoreishy, and M. Razavi-Nouri Transient Simulation of Polymeric Fluids Flow in an Intermeshing Co-rotating Twin Screw Extruder Using Fictitious Domain Method H. Sobhani , M.H.R. Ghoreishy, M. Razavi-Nouri, and P. Anderson | A-10-178-1 | 12:10-12:30 | Micromechanical Modeling of PLSNs Containing Exfoliated/intercalated Structures A. Zehtab Yazdi , R. Bagheri, and M. Kazeminezhad | 12:30-14:00 Lunch Break, Exhibition & Poster Viewing | Chairpersons: M. Rafizadeh, M. Razavi Nouri, N. Yaghoubi | A-10-399-5 | 14:00-14:20 | Copolymerization of Styrene and Methyl Methacrylate: Experimental Kinetics and Mathematical Modeling K. Jalili , F. Abbasi, and M. Nasiri | A-10-35-2 | 14:20-14:40 | CFD Modeling of Transport Phenomena in MMA-St Copolymer Lost Foam Casting Process A. Charchi , M. Rezaei, S. Hossainpour, J. Shayeg, and S. Falak | A-10-108-1 | 14:40-15:00 | Study of Chain-length-dependent and Diffusion-controlled Styrene Polymerization in FRP and ATRP Systems by Monte Carlo Simulation M. Najafi , H.Roghani-Mamaqani, M. Salami-Kalajahi, and V. Haddadi-Asl | Sunday, 18 October, Hall E | A-10-509-1 | 15:00-15:20 | Solution of Population Balance Equations in Emulsion Polymerization Using Method of Moments E. Vafa and M. Shahrokhi | 15:30-16:00 Break, Exhibition & Poster Viewing | Resin and Adhesives | Chairpersons: H. Baharvand, H. Piroozfar, Z. Ranjbaran | A-10-700-1 | 16:00-16:20 | Preparation and in Vitro Evaluation of a Fentanyl Drug in Adhesive Patch Based on Functional and Non Functional Acrylic Adhesives S.M. Taghizadeh , A. Soroushnia, and F. Mohamadnia | A-10-221-2 | 16:20-16:40 | Interface Fracture Toughness of Bonded Joints Subjected to Mixed Mode I/II R. Bakhtiari , N. Choupani, and K. Kermani | A-10-183-1 | 16:40-17:00 | A Novel Dentin Adhesive Containing MMP Inhibitors and Evaluating the Mechanical Properties M. Ghavam, M. Atai, M. Reshad , and M. Imani | A-10-600-1 | 17:00-17:20 | Study the Effect of Mixing Temperature on the Cure Characteristics of Epoxy/Diaminodiphenylmethane System F. Ferdowsian , M. Ebrahimi, and A. Jannesari | A-10-604-1 | 17:20-17:40 | Non-isothermal Cure Kinetics of DGEBA/Nanosilica Composites M. Ghaemy and S.M. Amini Nasab |
|
